IndMacDig.com |

GrindClean Lubricants range of products was developed over the last 7 years in response to customer demand. Our customers were asking for a range more efficient high performance coolants that were environmentally friendly and both OSHA and Health and Safety compliant, while at the same time economical to buy and use.

Time to get into the 21’st century

With today’s machines using more and more and exotic materials in their construction, we had to develop coolants that were corrosion neutral and also capable of maintaining the correct Ph during use. We had to consider issues such as Cobalt Leaching and air- born bacteria. We had to deliver higher flash points due to the high heat and fire potential created by today’s higher stock removal rates. We had to consider today’s modern filtration systems. Our coolants are capable of being filtered down to sub-micron levels without loss of performance enhancing additives. Finally we had to produce low viscosity oils that were stable and safe at all operating temperatures. We achieve this by using only pure oils. At GrindClean we do not use volatile dilutants to achieve reduced viscosity. We refine it that way.

All GrindClean Coolants and Fluids meet or exceed the machine manufacturers specifications and are used by many of the top toolmakers in the USA and Canada. In fact several Boeing subcontractors use and approve GrindClean coolants exclusively.

Full coolant analysis and laboratory facility at your service

No coolant company is complete without its own Laboratory. At GrindClean we have full laboratory and analytical facility where we can quickly analyze coolant and pinpoint performance or health and safety issues, make recommendations, and quickly improve cutting performance while reducing costs through higher productivity.

East or West

No matter where you are we have you covered. With locations in California and North Carolina and soon in the Mid West you can be sure that we will keep your freight costs and lead times to a minimum.